The Fully Automatic Heat Shrink Machine is equipped with a safety clutch device, which effectively prevents the destruction of the product and greatly reduces the product damage rate in the market today. The heat shrink packaging machine adopts an extended chain plate conveyor, and there will be no rolling during feeding. The product will not affect the packaging speed due to movement. The unique packaging form of the fully automatic heat shrink machine not only makes the packaging effect more perfect but also saves production costs and ensures site cleanliness. The fully automatic heat shrink machine adopts a unique packaging control, which makes the shrinkage more perfect and the effect better. Moreover, the heat shrink packaging machine is more energy-efficient, making product production more convenient.
There are many types of fully automatic heat shrink machines, and their performance differs, but their work efficiency has been recognized by the market, continuously satisfying the needs of manufacturers and consumers in packaging beauty and quality, and saving packaging costs.
The fully automatic heat shrink machine is a very common packaging machine on the market, widely used by various production enterprises. When using the heat shrink packaging machine normally, it also needs regular maintenance.
We must regularly check some parts, such as once every half month or once a month. The parts that need to be checked are the moving parts such as the worm wheel, worm, bolts on the lubricating block, bearings, etc. to see if these parts are flexible and worn. Deficiencies found should be repaired in a timely manner and should not be used forcibly.
Secondly, the fully automatic heat shrink machine should be used in a dry and clean indoor environment and should not be used in places where there are corrosive gases such as acids in the atmosphere.
After the heat shrink machine is used, the drum should be removed for cleaning, and the remaining powder in the bucket should be brushed off, and then installed correctly to prepare for the next use.
If the drum moves back and forth during the working process, adjust the M10 screw on the front bearing claw to the correct position. If the gear shaft moves, adjust the M10 screw behind the bearing bracket to the appropriate position and adjust the gap to make the bearing not produce any noise. The hand pulley is properly tightened. If it is too tight or too loose, the machine may be damaged.
Finally, if the packaging machine equipment is not used for a long time, the entire machine must be cleaned, and the smooth surfaces of the machine parts should be coated with rust-proof oil and covered with a cloth. If the equipment has not been used for a long time, check all components before starting.